{"title":"Mapei","description":null,"products":[{"product_id":"idrosilex-pronto","title":"Planiseal 88 (Formally Idrosilex Pronto)","description":"\u003ch2\u003eMapei Planiseal 88 (formerly Idrosilex Pronto) – osmotic cementitious waterproofing mortar\u003c\/h2\u003e\n\u003cp\u003eA one-component osmotic mortar made from a cement-based compound, selected graded aggregates and special synthetic resins. Mixed with water it becomes a fluid mortar that can be applied by brush, trowel or spray, giving excellent adhesion for complete waterproofing – even against negative (counter) pressure up to 1 atmosphere. A premium tanking slurry at a competitive price. Certified to AS\/NZS 4020:2018 for use with potable water.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eUnderground masonry subject to water and moisture seepage, interior and exterior cellar walls, foundation walls, basins, reservoirs, concrete or masonry tanks, swimming pools, lift pits, underground passages, irrigation channels and other damp areas.\u003c\/p\u003e\n\u003ch3\u003eApplication in brief\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSurfaces must be clean and sound; block active leaks first (e.g. with Lamposilex). Soak the substrate, then let excess water evaporate.\u003c\/li\u003e\n\u003cli\u003eApply 2–3 coats by brush (or two by spray), 5–24 hours apart, to a final thickness of approx. 2–3mm.\u003c\/li\u003e\n\u003cli\u003eApplication temperature +5°C to +35°C; pot life approx. 1 hour; put into service after 7 days.\u003c\/li\u003e\n\u003cli\u003eRigid waterproofing only – not for surfaces subject to movement or traffic. Not for plaster, plasterboard, painted walls or timber boards, and not a cure for condensation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eConsumption:\u003c\/strong\u003e approx. 1.5kg\/m² per mm of thickness. Store for up to 12 months in original packaging in a dry place. For professional use; contains cement – wear gloves and goggles.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0913\/3903\/0865\/files\/Planiseal_88_TDS.pdf?v=1769425628\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eDownload the Mapei Planiseal 88 technical data sheet (PDF)\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0913\/3903\/0865\/files\/Planiseal_88_SDS.pdf?v=1792096310\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eDownload the Planiseal 88 safety data sheet (PDF)\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Mapei","offers":[{"title":"25Kg","offer_id":50786796994897,"sku":"937025","price":87.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0913\/3903\/0865\/files\/Planiseal88Pic.png?v=1755088756"},{"product_id":"mapethene-eq","title":"Mapethene EQ","description":"\u003cp\u003eMapethene EQ is a self-adhesive bituminous\n membrane made from a mixture of bitumen and\n special polymers bonded to a film of high density\n polyethylene (HDPE). Used to waterproof vertical and\n horizontal surfaces, foundation slabs, foundations,\n under ground, garages and cellar walls. As well as all\n known and suitable mineral substrates.\u003c\/p\u003e","brand":"Mapei","offers":[{"title":"Default Title","offer_id":50786799419729,"sku":"60006","price":367.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0913\/3903\/0865\/files\/6006_4d546a50-4fe7-4bde-b316-94fdf091b055.png?v=1755088751"},{"product_id":"mapethene-primer","title":"Mapethene Primer","description":"\u003cp\u003e Mapethene Primer is used as a primer for self-adhesive\n bitumen membrane, Mapethene EQ. \nAdvantages \nReady to use.\n Applied by brush, roller or spray.\n Quick drying.\n Solvent-free\n Coverage: Approx. 0.1-0.2 kg\/m². This consumption rate\n is for indication purposes only and may increase,\n depending on the roughness of the substrate.\u003c\/p\u003e","brand":"Mapei","offers":[{"title":"Default Title","offer_id":50786803286353,"sku":"600045","price":48.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0913\/3903\/0865\/files\/600045_3_7691c2a5-2814-40a3-92e9-abe651eb9913.png?v=1755088746"},{"product_id":"mapegrout-fast-set-25kg","title":"Mapei Mapegrout Fast-Set Rapid Concrete Repair Mortar – 25kg","description":"\u003ch2\u003eMapei Mapegrout Fast-Set Concrete Repair Mortar\u003c\/h2\u003e\n\n\u003ch3\u003eRapid-Setting R3 Mortar for Structural Concrete Repairs\u003c\/h3\u003e\n\n\u003cp\u003eMapei Mapegrout Fast-Set is a rapid-setting, shrinkage-compensated repair mortar for restoring damaged horizontal and vertical concrete surfaces. The fibre-reinforced formulation provides excellent workability, allowing it to be applied to vertical repairs without slumping.\u003c\/p\u003e\n\n\u003cp\u003eOnce mixed with water, the mortar sets in approximately 30 minutes and repaired areas can be placed back into use after approximately 2–3 hours. Its high strength, adhesion, water resistance and wear resistance make it suitable for structural concrete repairs, industrial floors, balconies, beams, pillars and concrete pipes.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features \u0026amp; Benefits\u003c\/h4\u003e\n\n\u003cul\u003e\n\u003cli\u003eRapid-setting and hardening concrete repair mortar\u003c\/li\u003e\n\u003cli\u003eFibre-reinforced and shrinkage compensated\u003c\/li\u003e\n\u003cli\u003eClass R3 structural repair mortar to EN 1504-3\u003c\/li\u003e\n\u003cli\u003eSuitable for horizontal and vertical repairs\u003c\/li\u003e\n\u003cli\u003eExcellent thixotropic consistency prevents slumping\u003c\/li\u003e\n\u003cli\u003eSets in less than 30 minutes at 20°C\u003c\/li\u003e\n\u003cli\u003eRepaired areas can be ready for use after approximately 2–3 hours\u003c\/li\u003e\n\u003cli\u003eSuitable for light foot traffic after approximately three hours\u003c\/li\u003e\n\u003cli\u003eHigh compressive and flexural strength\u003c\/li\u003e\n\u003cli\u003eExcellent adhesion to properly prepared existing concrete\u003c\/li\u003e\n\u003cli\u003eExcellent resistance to water penetration\u003c\/li\u003e\n\u003cli\u003eGood resistance to wear\u003c\/li\u003e\n\u003cli\u003eSuitable for layers between 5mm and 20–25mm thick\u003c\/li\u003e\n\u003cli\u003eDeeper repairs can be completed in multiple layers\u003c\/li\u003e\n\u003cli\u003eSuitable for internal and external concrete repairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eTypical Applications\u003c\/h4\u003e\n\n\u003cul\u003e\n\u003cli\u003eRepairing damaged or deteriorated concrete\u003c\/li\u003e\n\u003cli\u003eRestoring concrete beams, pillars and balconies\u003c\/li\u003e\n\u003cli\u003eRepairing concrete damaged by corroding reinforcement\u003c\/li\u003e\n\u003cli\u003eFast repairs to industrial concrete flooring\u003c\/li\u003e\n\u003cli\u003eSealing surface cracks in concrete and cement renders\u003c\/li\u003e\n\u003cli\u003eFilling aggregate bridging and surface defects\u003c\/li\u003e\n\u003cli\u003eFilling shrinkage joints and formwork spacer holes\u003c\/li\u003e\n\u003cli\u003eCovering exposed reinforcing rods following preparation\u003c\/li\u003e\n\u003cli\u003eAssembling concrete pipes\u003c\/li\u003e\n\u003cli\u003eRepairing damaged concrete pipe edges\u003c\/li\u003e\n\u003cli\u003ePointing brickwork before waterproofing with Planiseal 88\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSurface Preparation\u003c\/h4\u003e\n\n\u003cp\u003eRemove all loose, damaged, contaminated or poorly bonded concrete until a rough, sound and resistant substrate is exposed. Existing coatings and previous repairs that are not firmly bonded must also be removed.\u003c\/p\u003e\n\n\u003cp\u003eClean the concrete and reinforcement thoroughly to remove dust, laitance, rust, grease, oil, paint and other contaminants. The prepared concrete should have a rough surface with irregularities at least 5mm deep and exposed aggregate to support effective adhesion.\u003c\/p\u003e\n\n\u003cp\u003eProtect exposed reinforcing steel with Mapefer or Mapefer 1K where required. Saturate the prepared concrete with clean water, then allow excess water to evaporate before applying the mortar. The receiving surface should be damp without standing water.\u003c\/p\u003e\n\n\u003cp\u003eFor improved adhesion, apply a bonding slurry made from one part Mapegrout Fast-Set mixed with approximately 0.24–0.25 parts water. Apply the repair mortar while the bonding slurry remains fresh.\u003c\/p\u003e\n\n\u003ch4\u003eMixing\u003c\/h4\u003e\n\n\u003col\u003e\n\u003cli\u003ePlace 3.75–4 litres of clean water into a suitable mixing container.\u003c\/li\u003e\n\u003cli\u003eGradually add one 25kg bag of Mapegrout Fast-Set while mixing.\u003c\/li\u003e\n\u003cli\u003eMix using an electric paddle mixer until a smooth, lump-free mortar is produced.\u003c\/li\u003e\n\u003cli\u003ePrepare only as much material as can be applied within approximately 10 minutes.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eDo not add extra water after the mortar has started to set. Do not add cement, lime, gypsum or other admixtures.\u003c\/p\u003e\n\n\u003ch4\u003eApplication\u003c\/h4\u003e\n\n\u003col\u003e\n\u003cli\u003eApply the mixed mortar to the freshly prepared or slurry-coated substrate using a float, trowel or gauging trowel.\u003c\/li\u003e\n\u003cli\u003eApply at a thickness between 5mm and 20–25mm per layer.\u003c\/li\u003e\n\u003cli\u003eFor deeper repairs, apply additional layers at intervals of approximately 15 minutes.\u003c\/li\u003e\n\u003cli\u003eWork each intermediate layer with a 10mm notched trowel to improve adhesion between coats.\u003c\/li\u003e\n\u003cli\u003eFinish the final surface using a suitable plastering trowel.\u003c\/li\u003e\n\u003cli\u003eKeep repaired concrete patches damp for at least 24 hours.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eProtect repaired floors against rapid moisture evaporation using polyethylene sheets or damp coverings. The repaired surface can normally accept light traffic after approximately three hours at 20°C.\u003c\/p\u003e\n\n\u003ch4\u003eCoverage\u003c\/h4\u003e\n\n\u003cp\u003eApproximate consumption is 18kg per m² for every 10mm of applied thickness. Actual consumption will depend on the depth, profile and condition of the repair.\u003c\/p\u003e\n\n\u003ch4\u003eTechnical Information\u003c\/h4\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eFibre-reinforced, shrinkage-compensated cementitious repair mortar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClassification\u003c\/td\u003e\n\u003ctd\u003eEN 1504-3 Class R3 structural repair mortar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConsistency\u003c\/td\u003e\n\u003ctd\u003eThixotropic powder mortar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum aggregate size\u003c\/td\u003e\n\u003ctd\u003e1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixing water\u003c\/td\u003e\n\u003ctd\u003e3.75–4 litres per 25kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePot life\u003c\/td\u003e\n\u003ctd\u003eApproximately 10 minutes at 20°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetting time\u003c\/td\u003e\n\u003ctd\u003eLess than 30 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication thickness\u003c\/td\u003e\n\u003ctd\u003e5–25mm per layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWaiting time between layers\u003c\/td\u003e\n\u003ctd\u003eApproximately 15 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReady for use\u003c\/td\u003e\n\u003ctd\u003eApproximately 2–3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication temperature\u003c\/td\u003e\n\u003ctd\u003e5°C to 35°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003eApproximately 18kg per m² per 10mm thickness\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDensity of mixed mortar\u003c\/td\u003e\n\u003ctd\u003eApproximately 2,150kg\/m³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive strength after 3 hours\u003c\/td\u003e\n\u003ctd\u003eMore than 10MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive strength after 28 days\u003c\/td\u003e\n\u003ctd\u003eMore than 40MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBond strength\u003c\/td\u003e\n\u003ctd\u003eMore than 1.5MPa\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReaction to fire\u003c\/td\u003e\n\u003ctd\u003eEuroclass A1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e25kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003eUp to 12 months when unopened and stored correctly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eImportant Application Information\u003c\/h4\u003e\n\n\u003cul\u003e\n\u003cli\u003eDo not apply to dry, dirty or contaminated surfaces\u003c\/li\u003e\n\u003cli\u003eDo not apply below 5°C\u003c\/li\u003e\n\u003cli\u003eDo not use damaged or previously opened bags\u003c\/li\u003e\n\u003cli\u003eDo not use for application with plaster-spraying equipment\u003c\/li\u003e\n\u003cli\u003eDo not use for precision anchoring applications\u003c\/li\u003e\n\u003cli\u003eUse cold mixing water during warm weather\u003c\/li\u003e\n\u003cli\u003eUse lukewarm mixing water in low temperatures\u003c\/li\u003e\n\u003cli\u003eProtect fresh repairs against rapid moisture loss\u003c\/li\u003e\n\u003cli\u003eDo not leave as a decorative facade finish, as the colour may change after hardening\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eStorage and Safety\u003c\/h4\u003e\n\n\u003cp\u003eStore unopened bags in a dry, covered location at temperatures between 5°C and 35°C. Protect the product from direct sunlight and moisture before use.\u003c\/p\u003e\n\n\u003cp\u003eMapegrout Fast-Set is intended for professional use. Wear suitable gloves, protective clothing and eye protection during mixing and application. Always consult the current technical data sheet and safety data sheet before use.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0913\/3903\/0865\/files\/Mapegrout_Fast-Set_TDS.pdf?v=1769425630\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eDownload the Mapei Mapegrout Fast-Set technical data sheet (PDF)\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0913\/3903\/0865\/files\/Mapegrout_Fast-Set_SDS.pdf?v=1792178593\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eDownload the Mapei Mapegrout Fast-Set safety data sheet (PDF)\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Mapei","offers":[{"title":"Default Title","offer_id":53622386196817,"sku":"137725","price":93.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0913\/3903\/0865\/files\/Mapegrout_Fast-Set.png?v=1773920885"},{"product_id":"mapei-lamposilex-water-plug","title":"Mapei Lamposilex Rapid-Setting Water Plug – 5kg","description":"\u003ch2\u003eMapei Lamposilex Water Plug\u003c\/h2\u003e\n\n\u003ch3\u003eUltra-Fast Hydraulic Binder for Stopping Active Water Leaks\u003c\/h3\u003e\n\n\u003cp\u003eMapei Lamposilex is an ultra-fast-setting hydraulic binder designed to stop active water leaks immediately, including water entering under pressure. When mixed with water, the pre-blended powder forms a plastic, thixotropic paste that is easy to shape and apply to cracks, holes and rigid joints.\u003c\/p\u003e\n\n\u003cp\u003eSuitable for basements, tanks and other below-ground structures, Lamposilex sets in approximately one and a half minutes at 20°C. Once cured, it provides a waterproof, water-repellent repair with high early compressive and flexural strength.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features \u0026amp; Benefits\u003c\/h4\u003e\n\n\u003cul\u003e\n\u003cli\u003eStops active water leaks, including water under pressure\u003c\/li\u003e\n\u003cli\u003eUltra-fast setting time of approximately 1.5 minutes at 20°C\u003c\/li\u003e\n\u003cli\u003eDevelops high compressive and flexural strength within 30 minutes\u003c\/li\u003e\n\u003cli\u003eForms a waterproof and water-repellent repair\u003c\/li\u003e\n\u003cli\u003ePlastic, thixotropic consistency is suitable for vertical surfaces\u003c\/li\u003e\n\u003cli\u003eCan be applied without formwork\u003c\/li\u003e\n\u003cli\u003eSuitable for sealing cracks, holes and rigid construction joints\u003c\/li\u003e\n\u003cli\u003eSuitable for basements, tanks and below-ground structures\u003c\/li\u003e\n\u003cli\u003eChloride-free formulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eTypical Applications\u003c\/h4\u003e\n\n\u003cul\u003e\n\u003cli\u003eStopping active leaks in basements\u003c\/li\u003e\n\u003cli\u003eStopping water ingress in below-ground structures\u003c\/li\u003e\n\u003cli\u003eSealing leaks in above-ground water tanks\u003c\/li\u003e\n\u003cli\u003eWaterproofing rigid wall-to-floor joints\u003c\/li\u003e\n\u003cli\u003eSealing cracks and holes in concrete and masonry\u003c\/li\u003e\n\u003cli\u003eLocalised repairs where water is entering under pressure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eSurface Preparation\u003c\/h4\u003e\n\n\u003cp\u003eWhen treating a leaking crack or hole, enlarge the opening into a dovetail shape so that its widest section is inside the substrate. The external opening should measure at least approximately 20 mm wide and 20 mm deep. Remove all loose, weak and friable material from the cavity.\u003c\/p\u003e\n\n\u003cp\u003eFor rigid joints, remove degraded material and thoroughly clear away dust. Saturate the prepared area with clean water, then remove any unabsorbed water before application. The ideal substrate should be fully saturated but have no visible surface water.\u003c\/p\u003e\n\n\u003ch4\u003eMixing\u003c\/h4\u003e\n\n\u003col\u003e\n\u003cli\u003ePlace 280 g of clean water into a suitable container for every 1 kg of Lamposilex.\u003c\/li\u003e\n\u003cli\u003eGradually add the Lamposilex powder while stirring.\u003c\/li\u003e\n\u003cli\u003eMix manually with a trowel until a smooth, lump-free paste is obtained.\u003c\/li\u003e\n\u003cli\u003ePrepare only enough material to use within approximately one minute.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eFor volume measurement, mix approximately 2.5 parts Lamposilex powder with one part water. Do not add lime, cement, gypsum or other materials to the mixture.\u003c\/p\u003e\n\n\u003ch4\u003eStopping an Active Water Leak\u003c\/h4\u003e\n\n\u003col\u003e\n\u003cli\u003eShape the freshly mixed Lamposilex by hand into a plug resembling a cork.\u003c\/li\u003e\n\u003cli\u003eWait a few seconds until the mixture begins to stiffen.\u003c\/li\u003e\n\u003cli\u003eForce the plug firmly into the prepared crack or hole.\u003c\/li\u003e\n\u003cli\u003eMaintain pressure for approximately two to three minutes until the material has set.\u003c\/li\u003e\n\u003cli\u003eRemove excess hardened material using an abrasive disc or suitable mechanical method.\u003c\/li\u003e\n\u003c\/ol\u003e\n\n\u003cp\u003eWhere several leaks are present, begin with the highest leak and work downwards.\u003c\/p\u003e\n\n\u003ch4\u003eSealing Rigid Joints\u003c\/h4\u003e\n\n\u003cp\u003eApply the freshly mixed Lamposilex immediately using a trowel or float, pressing it thoroughly into the prepared cavity. Keep the completed repair damp for the first 15 to 20 minutes.\u003c\/p\u003e\n\n\u003ch4\u003eApplication in Different Temperatures\u003c\/h4\u003e\n\n\u003cp\u003eIn warm conditions, protect the product from direct sunlight and use very cold mixing water to help maintain sufficient working time. In low temperatures, use water at approximately 20°C and store the product in a heated, dry location before application, as cold conditions will delay setting and curing.\u003c\/p\u003e\n\n\u003ch4\u003eTechnical Information\u003c\/h4\u003e\n\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eProperty\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eUltra-fast-setting hydraulic binder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConsistency\u003c\/td\u003e\n\u003ctd\u003eFine powder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eGrey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulk density\u003c\/td\u003e\n\u003ctd\u003eApproximately 1,100 kg\/m³\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDry solids content\u003c\/td\u003e\n\u003ctd\u003e100%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixing ratio by weight\u003c\/td\u003e\n\u003ctd\u003e100 g Lamposilex to 28 g water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixing ratio by volume\u003c\/td\u003e\n\u003ctd\u003e2.5 parts Lamposilex to 1 part water\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixed consistency\u003c\/td\u003e\n\u003ctd\u003ePlastic and thixotropic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMixed pH\u003c\/td\u003e\n\u003ctd\u003eApproximately 12.8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePot life at 20°C\u003c\/td\u003e\n\u003ctd\u003eApproximately 1 minute\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical setting time at 20°C\u003c\/td\u003e\n\u003ctd\u003eApproximately 1.5 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum application temperature\u003c\/td\u003e\n\u003ctd\u003e5°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConsumption\u003c\/td\u003e\n\u003ctd\u003eApproximately 1.8 kg per litre of cavity volume\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive strength after 30 minutes\u003c\/td\u003e\n\u003ctd\u003eApproximately 17 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive strength after 24 hours\u003c\/td\u003e\n\u003ctd\u003eApproximately 32 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressive strength after 28 days\u003c\/td\u003e\n\u003ctd\u003eApproximately 46 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength after 30 minutes\u003c\/td\u003e\n\u003ctd\u003eApproximately 3 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlexural strength after 28 days\u003c\/td\u003e\n\u003ctd\u003eApproximately 9 N\/mm²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePack size\u003c\/td\u003e\n\u003ctd\u003e5 kg bag\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShelf life\u003c\/td\u003e\n\u003ctd\u003e12 months when stored correctly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch4\u003eCleaning and Storage\u003c\/h4\u003e\n\n\u003cp\u003eClean Lamposilex from tools with water before it begins to harden. Once set, the material can only be removed mechanically. Store unopened packs indoors in a dry location and protect them from moisture, direct sunlight and extreme temperatures.\u003c\/p\u003e\n\n\u003ch4\u003eImportant Information\u003c\/h4\u003e\n\n\u003cp\u003eLamposilex has an extremely short working time, so prepare only small quantities that can be applied immediately. Always read the current product label, technical data sheet and safety data sheet before mixing or application.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0913\/3903\/0865\/files\/Lamposilex_Water_Plug_TDS.pdf?v=1773921158\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eDownload the Mapei Lamposilex technical data sheet (PDF)\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0913\/3903\/0865\/files\/Lamposilex_SDS.pdf?v=1792096310\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eDownload the Lamposilex safety data sheet (PDF)\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"Mapei","offers":[{"title":"Default Title","offer_id":54423070900561,"sku":"BIO-606","price":54.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0913\/3903\/0865\/files\/Lamposilex.png?v=1785409092"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0913\/3903\/0865\/collections\/Mapei_logo_2.png?v=1792852262","url":"https:\/\/biokilcrown.co.uk\/collections\/mapei.oembed","provider":"BIOKIL.","version":"1.0","type":"link"}