Everbuild Aquaseal Waterproof Tanking Membrane

Everbuild Aquaseal Waterproof Tanking Membrane – ready-to-use liquid waterproofing compound

Aquaseal ® Waterproof Tanking Membrane is a ready-to-use liquid waterproofing compound that is applied as a 2-coat system by brush. It provides a permanently flexible watertight membrane on floors and walls prior to tiling in shower areas, wet rooms and wet zones, and other areas subject to water exposure such as balconies and partially covered external areas. Non-hazardous and solvent free, it is quick drying, and tiling can commence after 12 hours. Aquaseal ® Waterproof Tanking Membrane can be used on its own in many applications where a flexible watertight membrane is required, or in conjunction with Aquaseal ® Tanking Primer, Aquaseal ® Tanking Tape and Aquaseal ® Tanking Drain Mat, as part of the Aquaseal ® Wet Room System, to provide a 100% waterproof membrane to conventional plaster and timber-based boards. It can be applied to all common building substrates such as plasterboard, MDF, plywood cementitious boards, blockwork, concrete & speciality wet room boards.

Key benefits

• Permanently flexible and watertight
• Can be used on most common building surfaces
• Ready to use, no diluting necessary
• Easy to apply by brush
• Non-hazardous, solvent free
• Can be tiled over after 12 hours
• Specific Gravity
• Ca. 1.35 g/cm3
• Drying Time
• Minimum 6 hours depending on ambient temperature
• Coverage4-7.5 m2 per 5L depending on porosity of substrate

Typical applications

• For showers, wet rooms and wet zones in bathrooms
• As a tanking membrane as part of the Aquaseal® Wet Room System
• As a waterproof membrane on most common building surfaces
• Balconies and partially covered external areas

Technical information

Available sizes and packs

Health and safety

Read the Safety Data Sheet before use.

Download the Everbuild Aquaseal Waterproof Tanking Membrane technical data sheet (PDF)

Download the Everbuild Aquaseal Waterproof Tanking Membrane safety data sheet (PDF)